GJC液相流量计校准校准辅助测量
栏目：GJC流量计 发布时间：2021-06-08 16:37
GJC液相流量计校准校准辅助测量
测量模式： 该种模式允许使用者进行的测量操作，电子管和 R232 接口采集校验数据。 R232 数据接口输出流量计的数据到任何配有 R232 的装置，例如打印机，终端或者个人电脑。通过 windows 附件的超级终端程序 Terminal 或者 Hyper-terminal 程序把数据倒入到 Excel 或者其他的程序从而进行曲线或者统计学分析。仪器内健传输波特率为 19200,9600,4800,2400,1200,600,300，内部有双跳开关进行调整。
Flow rates are measured volumetrically and are independent of the liquid type up to a viscosity of 10 centipoise. The unit uses a single chip micro-controller, the flow-rate (rounded to four digits) is displayed on a large four digit back-lit Liquid Crystal display (LCD) and data is output via the built-in RS232 interface to the full 6-digit reading. No user calibration is required; the unit is normally supplied gravimetrically calibrated at 1.0 (+-10%) ml/min. Calibration at multiple points is available. All wetted parts are made of PTFE , PEEK , DAI-EL PERFLOUR or Pyrex glass – no wetted metallic parts.
测量模式： 该种模式允许使用者进行的测量操作，电子管和 R232 接口采集校验数据。 R232 数据接口输出流量计的数据到任何配有 R232 的装置，例如打印机，终端或者个人电脑。通过 windows 附件的超级终端程序 Terminal 或者 Hyper-terminal 程序把数据倒入到 Excel 或者其他的程序从而进行曲线或者统计学分析。仪器内健传输波特率为 19200,9600,4800,2400,1200,600,300，内部有双跳开关进行调整。
Flow rates are measured volumetrically and are independent of the liquid type up to a viscosity of 10 centipoise. The unit uses a single chip micro-controller, the flow-rate (rounded to four digits) is displayed on a large four digit back-lit Liquid Crystal display (LCD) and data is output via the built-in RS232 interface to the full 6-digit reading. No user calibration is required; the unit is normally supplied gravimetrically calibrated at 1.0 (+-10%) ml/min. Calibration at multiple points is available. All wetted parts are made of PTFE , PEEK , DAI-EL PERFLOUR or Pyrex glass – no wetted metallic parts.